UNI-T UT202A Especificaciones descargar pdf (Pagina 12)

1211

UT202A Operating Manual

Note:

When DC voltage measurement has been

completed, disconnect the connection between

the testing leads and the circuit under test and

remove testing leads from the input terminals.

B. AC Voltage Measurement (see gure 4)

Warning

To avoid harms to you or damages to the Meter

from eletric shock, do not attempt to measure

voltages higher than 600V AC/DC.

To measure AC voltage, connect the Meter as

follows:

1. Insert the red test lead into the

terminal and the black test lead into the

COM terminal.

2. Set the rotary switch to .

3. Connect the test leads across with the object

being measured.

The measured value shows on the display.

VΩ

(gure 4)

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 24 25

Comentarios a estos manuales

Sin comentarios