UNI-T UT70C Especificaciones descargar pdf (Pagina 22)

(figure 9)

Measurement Operation (7)

Capacitance Measurement (see figure 9)

The Meter's capacitance ranges are: 1.000nF, 10.00nF,

100.0nF, 1.000

F, 10.00 F and 100.0 F. To measure

capacitance, connect the Meter as follows:

1. Insert the red test lead or the red test clip into the

V Hz terminal and the black test lead or black

test clip into the COM terminal.

2. Set the rotary switch to

and press to

select nF measurement mode.

3. Connect the test leads or the test clips across with

the object being measured.

The measured value shows on the display.

Note

l For testing the capacitor with polarity, connect the

red test clip or red test lead to anode & black test

clip or black test lead to cathode instead.

l It takes a longer time when testing a high capacitor

value, the testing time is around 15 seconds in

100

F range.

l When capacitance measurement has been completed,

disconnect the connection between the testing leads

and the circuit under test.

Select

nF Test

blackred

Model UT70C: OPERATING MANUAL

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 47 48

Sin comentarios

UNI-T UT70C Especificaciones Pagina 22