UNI-T UT713 Especificaciones

Model UT713OPERATING MANUAL

Figure 3MeasurementequipmentModel UT713: OPERATING MANUAL9

1. Press the pushbutton to turn the Calibrator on.2. Press INPUT to display INPUT if the Calibrator is at output mode which displays OUTPUT.3. Pr

Figure 4OutputequipmentModel UT713: OPERATING MANUAL11

Follow the below procedure to start the cold terminal temperature auto compensationfunctions:1. Press the pushbutton to turn the Calibrator on.2.

Because the temperature transducer aluminum plate is put at the back of theCalibrator, try to open the tilt stand if possible when operating the Calib

Explanation of International SymbolsThe following symbols are used on the calibrator or in this operating manual. Thetable below explains their meani

WarningMaintenanceMake sure the calibrator is off and the test leads are removed from the inputterminals and the circuit under test before opening the

Figure 5Periodically wipe the case with a damp clothand detergent; do not use abrasives orsolvents.l When the symbol appears on the display, re

WarningTo avoid personal injury or damage to the calibrator, use only a 125mA 250Vfuse for F1.In Input mode, the calibrator and TC are reliably connec

Figure 6Replace the fuses using the following procedure:1. Remove the test leads from the calibrator terminals and turn the calibrator off.2. Remo

TABLE OF CONTENTSTITLE PAGE3346678101214151919IntroductionUnpacking I

SpecificationsSpecifications are based on a one year calibration cycle and apply for ambienttemperature from +18 to +28 unless stated otherwise.Temp

-20~1750-4~3182-20~1750-4~3182600~18001112~3272RSB0.04% 3( 100 )0.04% 5.4( 212 )0.04% 2( 100 )0.04% 3.6( 212 )1 or 1Temperature RangesThermoc

Thermocouple TypeJ, K, T, E, N, R, S, BStandardNIST-175ScalesITS-90ModemVRange-10.00~110.00mV-110.0~1100.0mVAccuracy0.04% 2 digitsDisplay Resolution10

Resolution: TC: 0.1 or 0.1 (J, K, T, E, N); 1 or 1 (R, S, B). DC mV: 10 V (110mV range); 0.1mV (1100mV range) Cold Junction Error:

* END *This operating manual is subject to change without notice.Model UT713: OPERATING MANUAL23

Copyright 2007 Uni-Trend Group Limited.All rights reserved.Manufacturer:Uni-Trend Technology (Dongguan) LimitedDong Fang Da DaoBei Shan Dong Fang Indu

TABLE OF CONTENTSTITLE PAGE212122Thermocouple Standards and ScalesMil

DescriptionOperating ManualTest LeadAlligator Clip9V Alkaline Battery (1604A or 6LF22)IntroductionThe UNI-T Model UT713 Thermocouple Calibrator is a p

WarningSafety InformationThis Meter complies with the standard CE EN61326.To avoid possible electric shock or personal injury:llllBefore using the cal

lllllllReplace the battery as soon as the battery indicator appears. With alow battery, the Meter might produce false readings that can lead toelect

Figure 1Press so thatOUTPUT is onthe displayPress and toincrement ordecrement a digit.Press and to stepup/down from 0 to 9 .Hold down to scro

Figure 2Show TC type orvoltage rangeelectedPress so thatINPUT is on thedisplayInputPress to turn theMeter on and offInput TerminalsDisplay theselected

1. Press the pushbutton to turn the Calibrator on.2. Press OUTPUT to display OUTPUT if the Calibrator is at input mode which displays INPUT.3. Pr