
MIDI TO AMX-192
In this application, MIDI is converted to AMX 192.
CONNECTOR OPERATION
Microplex IN Not used
Microplex OUT Not Used
DMX IN Not used
*DMX out Output AMX 192 (64 or 128 ch)
MIDI / Analog MIDI Input
Luma-net Not Used
RS-232 Not Used
JUMPER LOCATIONS
P4 & 5 P7 JP6 & 7 JP8 & 9 JP10 JP11 JP12 JP13
OPEN OPEN N/A 1-2 1-2 2-3 2-3 2-3
P6 P8 JP1 DMX OUT CABLE
N/A N/A POSITION 2 JP3
DIPSWITCH POSITIONS
C1 C2 C3 C4 ADDRESS 1 - 7 A8
DN DN UP DN A1-4 SELECTS MIDI CHAN, A5 UP SETS IGNORE NTOFF DN:64
MIDI Channel 1 - 16 can be selected with switch A1-4 (see chart at end).
Velocity of MIDI Note On messages set respective dimmer levels. C0 = dimmer channel 1.
Note Off (or Note On = 0) will turn off channel unless A5 is in the up position.
AMX output is sent as either 64 or 128 channels, depending on the setting of switch A8.
*IMPORTANT - Move AMX output connector jumper from JP4 to JP3.
INTERFACE UNIT
Software Revision 1.05, Version A MIDI TO AMX-192
NSI CORPORATION 10
Comentarios a estos manuales