UNI-T UT501 Manual de instalación descargar pdf (Pagina 15)

LUMA-NET to AMX - 192

In this application, Microplex or DMX is mixed with LUMA-NET and transmitted as AMX-192.

CONNECTOR OPERATION

Microplex IN Input Microplex

Microplex OUT Not Used

DMX IN Input DMX 512

*DMX out Output AMX-192

MIDI / Analog Not used

Luma-net Luma-net network

RS-232 Not Used

JUMPER LOCATIONS

P4 & 5 P7 JP6 & 7 JP8 & 9 JP10 JP11 JP12 JP13

OPEN OPEN 2-3 N/A 2-3 2-3 1-2 2-3

P6 P8 JP1 DMX OUT CABLE

CLOSE CLS TO TERM LUMA POS 2 JP3

DIPSWITCH POSITIONS

C1 C2 C3 C4 ADDRESS 1 - 7 A8

UP DN DN UP STARTING ADDR OF LUMA-NET IN 16 INCREMENT DN:64

Allows up to 128 channels of Luma-net to be merged with DMX or Microplex and output as AMX 192 in a ‘‘last

action takes precedence’’ fashion.

Terminate Luma-net by closing jumper P8 only if last device on line.

IF 501 is always last device at end of DMX line.

See operator’s manual of Luma-net device for additonal information.

AMX output is sent as either 64 or 128 channels, depending on the setting of switch A8.

*IMPORTANT - Move AMX output connector jumper from JP4 to JP3.

INTERFACE UNIT

Software Revision 1.05, Version A LUMA-NET to AMX - 192

NSI CORPORATION 15

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 25 26

Sin comentarios

UNI-T UT501 Manual de instalación Pagina 15